You will have to set the same Google account that is previously synced on your phone if you did a hard reset, in case you forgot it or forgot your password then you're in the right place. In this post, we will show you the easy way how to bypass google account verification on starlight my star x without apk apps. All we got to do is to format FRP partition. To do that we need a scatter file so we can get FRP partition's addresses and click on the Format button in the SP Flash tool.
Pre-requisites Before you proceed
- You have to make sure that your starlight my star x is at least 50% charged.
- You need a PC or a Laptop to carry out the scatter file you're about to download.
- Back up your device in a way or another to get your data back in case you messed up with your starlight my star x
- Download Scatter file and SP flash tool
- Download and install the latest MTK preloader USB drivers for your device
1- Open Sp Flash Tool And Select Scatter File
2- Go To Format Tab And Select Manual Format Flash
Open Your Scatter File And Check Address
And Add -Begin Address 0x17FA0000
And Add -Format Length 0x100000
3- Now Press Start And Connect your starlight my star x to PC
4- Once it's Done. A green pass button will pop up. Disconnect USB Cable and power On Your Phone
Downloads:
➤ Scatter File
➤ Sp Flashtool
➤ Drivers
➤ Firmware
Watch Video Tutorial
0 Comments